- Home
- »
- Our Products
- »
OS32C Safety Laser Scanner
Providing you the best range of os32c safety laser scanner with effective & timely delivery.OS32C Safety Laser Scanner
Get Best Quote
Approx. Price: Rs 9,000 / PieceGet Latest Price
Product Brochure
Features:
Integrated management via Ethernet:
Setting 70 combinations:
Simplified Wiring:
Reducing Erroneous Detections in the Safety Zone:
Product Details:
| Brand | Omron |
| Scanner Type | Laser |
| Width-Head | 270 Deg |
| Sensor Type | Type 3 Safety Laser Scanner |
| Detection Capability | Configurable; Non-transparent with a diameter of 30, 40, 50, 70mm |
| Monitoring Zone | Monitoring Zone Set Count (Safety Zone + 2 Warning Zones) x 70 sets |
| Maximum Measurement Error | 100 mm (at range of 3 m or less) *1 110 mm (at distance greater than 3 m and up to 4m) *1 |
| Detection Angle | 270 Deg |
| Angular Resolution | 0.4 deg |
| Laser Beam Diameter | 6 mm at optics cover, 14 mm (typical) at 3 m. |
| Laser Scan Plane Height | 67mm from the bottom of the scanner (see "External Dimensional Drawings" on Catalog for more detail |
| Zone Switching Time | 20 to 320 ms |
| Line Voltage | 24 VDC +25%/-30% (ripple p-p 2.5 V max.) *2 |
| Power Consumption | Normal operation 5 W max., 4 W typical (without output load) *3 Standby mode 3.75 W (without outp |
| Emission Source Wavelength | Infrared Laser Diode (905 nm) |
| Operation Mode | Auto Start, Start Interlock, Start/Restart Interlock |
| Connection Type | Power Cable 18-pin mini-connector (pigtail) Communication Cable M12, 4-pin connector |
| Connection with PC | Communication Ethernet *6 OS SupportedWindows XP (32-bit version, Service Pack 3 or later) |
| Indicators | RUN indicator Green, STOP indicator Red, Interlock Indicator Yellow, Warning Output Indicator O |
| Protective Circuit | Protection against output load short and reverse power connection |
| Ambient Temperature | Operation -10 to 50 deg C, Storage -25 to 70 deg C |
| Ambient Humidity | Operation & Storage 95% RH max., non-condensing |
| Ambient Operation Illumination | Incandescent lamp Illumination on receiving surface 1500 lx max. (an angle of laser scanning plane |
| Insulation Resistance | 20 M Ohm or higher (500 VDC) |
| Dielectric Withstand Voltage | 350VDC, 1 minute |
| Enclosure Rating | IP65 (IEC60529) |
| Enclosure | Sensor head Die-cast aluminum, optical cover Polycarbonate, I/O block Die-cast aluminum |
| Dimensions | 133.0 x 104.5 x 142.7 mm (except cable) |
| Impact Resistance | 98 m/s2 1,000 times for each of X, Y, and Z directions (IEC60068-2-29) |
| Vibration | 10 to 55 Hz double-amplitude of 0.7 mm, 20 sweepings for X, Y, and Z directions (IEC60068-2-6) |
| Weight | 1.3 kg |
| Power Cable | Up to 30 m |
| Communication Cable | Up to 100 m for 100BASE-TX cable *9 |
Features:
- The operating state can be determined at a glance
- Eight sector indicators* show the direction of intrusion.
- Front display shows operating state and error codes.US patent No. for individual sector indicators: US 6,753,776 B2
Integrated management via Ethernet:
- Industry's first Ethernet-compliant Safety Laser Scanner allows the user to check the operating state and analyze the cause of an emergency stop via LAN even in large-scale applications using multiple scanners.
- Multiple OS32Cs cannot be monitored simultaneously.
Setting 70 combinations:
- For complex
- AGV applications, up to 70 combinations - each with one safety zone and two warning zones - can be set. The two warning zones can be set to support various purposes such as warning sound and speed control
- For complex AGV applications, up to 70 combinations - each with one safety zone and two warning zones - can be set. The two warning zones can be set to support various purposes such as warning sound and speed control.
Simplified Wiring:
- OMRON STI's innovative I/O method requires fewer inputs when configuring multiple zones. Only 4 inputs are required to select from 6 zone sets.
- If all 8 inputs are used, up to 70 zone sets are available.
Reducing Erroneous Detections in the Safety Zone:
- PTM (Pollution Tolerance Mode) enables a filter that allows the OS32C to distinguish between more than one detected reflection pulses. Ignoring small reflection pulses which could be caused by airborne dust or other contaminants in the safety zone.
- This function prevents nuisance machine stops due to dust.
Request
Callback
Callback
Yes! I am Interested
X
